How to Tighten Pants Without a Belt? Update 06/2022

For whatever reason, your new pair of jeans didn’t quite fit you when they arrived, whether you’d gained or lost some weight. Regardless of how you look at it, your jeans are either too big or too little! A common problem for people who don’t like the look of cinching their pants in with an elastic belt is how to tighten pants without one.

A safety pin, shoelace, or suspenders can be used to temporarily tighten pants without a belt. Taking in the side seams or paying a tailor to modify the waist is the easiest and most lasting technique to tighten pants without a belt. The waist will be permanently resized if the pants are shrunk.

There are thirteen ways to tighten jeans without a belt that you may read about in this post. You’ll also discover advice on how to wear jeans without a belt in this section. Finally, you’ll learn how to wear a belt with pants that don’t have any built-in loops for it.

How To Tighten Pants Without Belt

How to Tighten Pants Without a Belt: 13 Easy Methods

You don’t have to wear a belt to achieve a variety of fashionable tightening styles. A belted style is perfectly acceptable, of course! Even if you have a belt on hand, it may not match your attire for the day.

When that happens, switch it up with one of these 13 simple looks!

1. Belt Replacer

Having belt loops in your jeans allows you to effortlessly replace a belt with a colorful or unusual accessory. A new look while still keeping your jeans in place! Make sure the item you choose from the list below matches your personal style and your outfit in mind before using this technique.

As an alternative to buying a new belt, consider using one of these:

  • For a more boho aesthetic, wear your silk scarf collected loosely or folded into a long rectangle.
  • This is a piece of cord. Make a fancy knot or braid out of it to make it stand out even more!
  • Duct tape that has been folded over on itself to make it non-sticky.
  • A long chain was twisted around and around.
  • Several neckties tied in a knot.
  • This is a trick you should only employ if you’re working outside and your pants are falling down!

2. Button It

Tighter pants

If you have a pair of pants that are too loose around the waist, you may simply sew an extra button into the waistband. This allows you to reduce the circumference of the waistline by moving the buttonhole inward.

A button can be sewn on by anyone, even if they’ve never sewn before. These are all you need to do!

To sew on the button, you’ll need a needle, scissors, chalk or a fabric pencil, and a strand of thread the same color as your jeans.

  1. The first step is to cut a 12-inch-long piece of thread. One end of the thread should be tied in a double knot.
  2. Unknotted end of the thread should be used for the needle to be threaded with. Choosing a needle with a large eye can make threading much easier if you are a beginner. Another thing to keep in mind is that your trousers’ thick fabric will require a needle with a sharp tip.
  3. The next step is to put on your underwear. To get the waistband to fit, unbutton them and shift the empty buttonhole to the other side till it does. Mark this new spot on the waistband with chalk or a fabric pencil by drawing a line through the buttonhole.
  4. Pull the needle through from the inside of the waistband at this marking. You want the knot in the thread to catch and cling on to the waistband.
  5. To use the needle, insert it into one of the button’s holes. Hold the button firmly in place on the chalk marking and allow it to slide down the length of the thread.
  6. Pull the thread all the way through the button’s hole with the needle. In order to secure the button, you should now have a single thread loop.
  7. If the button still does not look firmly attached to the waistband, try moving the needle out of one hole in the button and then putting it back in with another hole.
  8. Make a final knot in the waistband to secure your thread and prevent it from unraveling.

Two buttons on your waistline should allow you to adjust the size of your waist as needed!

3. Clips

You can use a variety of clips to cinch up your pants for short periods of time. This approach works best if you only need an outfit to appear good for a short period of time, such for a picture shoot. The back of a wedding dress can be clipped to enable brides view how the garment would look if it was the appropriate size, for example.

You wouldn’t want to wear a clip to keep your jeans in place while strutting around town! Except for a big, baggy garment to drape over the clip and conceal it. this is not an issue.

The waistline of your jeans can be held in place by a variety of items, including:

  • Clothespins–the kind with a hinge will work best. You should not use wooden pins, as a loose splinter could snag your pants.
  • Clothespins that have a hinged end will do the job best. A splinter from a wooden pin could get caught in your pants.
  • Clips used by seamstresses. It is recommended that you use rubber tips on the clamps of this type if your pants are particularly delicate.

4. Elastic Waist

How to tighten jeans

If you’re trying to lose weight or are in the middle of a pant size transition, elastic waist pants can be a good option for you. We’re not talking about your grandma’s elastic trousers here, so don’t roll your eyes and skip to the next approach just yet.

Elastic-waist pants are now available in a variety of stylish styles. Even jeans with an elasticized waist are available! Loft, St. John’s Bay, and LuLuLemon are some of the brands that make fashionable elastic waist trousers for ladies. If you’re looking for good jeans with a comfortable waist for guys, check out Land’s End, Aeropostal, or L.L. Bean.

Of course, this isn’t a fantastic last-minute solution because you’d have to buy the pants. It’s possible to go elastic for a short period of time if you’re changing sizes.

5. Layer Your Look

Wearing layered clothing can also be a quick cure for loose pants. This will help you gain some weight around your midsection, which will allow you to wear your waistline comfortably once more!

There are a number of ways to accomplish this:

  • Tucking in your shirt is the simplest way to achieve this look! It’s possible that the extra layer of shirt between you and your too-large pants will help reduce the overall size of your outfit if worn tucked in.
  • To keep your shirt from riding up, use a tee shirt or tank top under it. The extra thickness at your waist can be hidden by tucking the undershirt in and hanging the outer shirt.
  • Keep your jeans tight by tucking in a jumper or a puffier top.
  • Instead, you may wear leggings, shorts, or even extra underwear to make your pants fit!
  • Rolling the waistband of your jeans over is another option that many schoolgirls have used in the past. Rolling the waistband a couple of times will make it bulkier and closer fit, but this only works with certain pant styles.

At home, where you can easily grab an extra article of clothes to bulk things up, this strategy works great.

6. Paper Clips

Use a huge paper clip and some thin pants to pinch your trouser waistbands together in an emergency! As a last resort, if you have to borrow a pair of jeans that don’t exactly fit you, this is a good option.

What’s the deal?

  1. The rear of your jeans should be facing up as you lay them down flat on the floor for this exercise.
  2. At the rear of the waistband, look for the two center belt loops.
  3. Using one of the loops, attach a huge paper clip to the string. The second belt loop can be threaded through the paper clip by pinching the center rear of the waistband. You must pass the belt loop through the paperclip until it reaches the center of the clip in order to attach a key to a key chain.
  4. It’s important that you position the clip so that it lies flat against the waistband.
  5. Keep the paperclip out of sight by wearing an overhanging shirt, hoodie, or sweater.

7. Safety Pin Pleat

Safety pins are one of the safest and least noticeable ways to tighten your pants. You can use a safety pin on the inside of your clothes if you need to make a quick alteration that resembles sewing.

Depending on how much you need to slim down your waist, you can either make a dart-like fold or a pleated fold at the back of your waistband. These pins should be small and not noticeable, but if you want to take in jeans or pants that are made of thick fabric, you may require bigger pins.

  1. Before anything else, make sure your jeans are turned inside out. The rear of the pants should be facing up on the floor or table.
  2. In order to create a dart-like fold, locate the middle of the waist. This will form a triangle of fabric at the rear of your jeans.
  3. Put a pin through the top of the triangle and fasten it to the waistband.
  4. Start with the pants lying face down on the floor for a more pleated fold. Find the center of your back. Mark the location of an additional safety pin or a chalk line one inch out from the central point.
  5. This is the next step, so bring the marked point to the middle. Make a pleated fold on both sides by repeating these steps.
  6. In order to keep the safety pins hidden from view, firmly pin each fold in place.

The amount of fabric folded into the dart or pleat can be adjusted. While a larger fold reduces the circumference of the waistline, it also draws attention to the fold.

8. Sew It

How to tighten jeans without belt

Sewing might provide a quick and lasting answer depending on the type of pants you need altered. In order to use this approach, you’ll need a special sewing machine that can handle thick fabrics like jeans and khakis!

It’s still possible to alter dress pants, sweatpants, and anything made of thin material.

Using this method, you’ll need a sewing machine, thread, chalk, and scissors.

  1. Put your pants on backwards and inside out to see if they fit. Holding the slack at your hips and waist, collect the cloth equally on both sides.
  2. Sewing pins or sewing clips can be used to secure the slack cloth at the corners. You’ll be able to gauge how much to reduce your waist by doing this on both sides.
  3. Using a piece of chalk, draw a line on either side of the pants where you want to stitch. Starting at the new waistband pinning point, taper the line toward the original side seam until it touches the side seam. Do this on both sides.
  4. Get matching thread for your sewing machine. Make two new side seams by sewing along the chalk lines you made.
  5. Snip any dangling threads with a pair of scissors.

Pro tip: remove the waistband, modify both the side and back seams, and possibly add some subtle darts to correctly alter a pair of pants. Afterwards, you stitch the waistband back on, and the trousers look like they were just purchased in the new size.

A great deal of effort and expertise are required, however, in order to do this. Adding a new side seam is all that’s required to make a simple fix!

9. Shoelace

Even though it doesn’t appear elegant, a shoelace may hold your pants up on its own and rescue the day! Any type of pants with belt loops can be used for this strategy. Any string or shoelace at least six inches length will do.

  1. Put on your pants to get a sense of how tight they need to be.
  2. In order to discover the two belt loops that are closest to the center back of your jeans, rhea behind yourself.
  3. Pass the shoelace through the two loops created by the laces.
  4. Tighten the belt loops by pulling the shoelaces tightly from both ends.
  5. The shoelaces should be tied in a bow or a knot at the ends.
  6. Use your jeans’ waistband to hide the shoelace’s loose ends!

10. Shrinking Options

Hot-water shrinking is a dangerous approach, yet you can decrease most pants by one or two sizes. It is possible to shrink clothing by as much as two to three sizes with this method, but there is a risk that your pants will shrink too much. This is why you should only use the shrinking procedure as a last resort, as it permanently alters the pants.

In addition, some fabrics are more prone to shrinkage than others. Denim, for example, is prone to shrinkage because of its high cotton content.

  1. Fill the pot two-thirds of the way with water. Bring it to a rolling boil over high heat in a large pot.
  2. Lower your jeans into the hot water with caution. To avoid scalding yourself, you may wish to use tongs.
  3. The pants should be boiled for around 20 minutes.
  4. Bring the pot to the sink in your kitchen. Make sure the sink is clean before proceeding! Lift the pants out of the boiling water with the tongs and place them in the sink.
  5. When the pants are cool enough to handle, place them in the dryer. Dry them out by running them through a regular cycle.

11. String

If you’re in a pinch and need to keep your pants up until you can find a better solution, you can use thread to hold them up!

String or twine can be passed through your belt loops and wrapped around your waist multiple times. A belt can be made out of the doubled-up string!

While most belts have rounded edges, this one may have a sharper edge, causing it to dig into your stomach as you bend down. Using safety pins or shoelaces is likely to be more convenient in the long run.

12. Suspenders

How to tighten suspenders

As a sophisticated, old-fashioned alternative to the belt, suspenders are an excellent choice. There are small clips at each end that allow modern suspenders to be attached to the waistbands of your pants so that they may hold your pants up in both the front and the rear!

It’s true that suspenders don’t go with every outfit. For example, they may not go well with a pair of sweatpants. With a blouse, suspenders, and rolled-up cuffs, you may create a variety of cute outfits for women. Suspenders look well with a variety of outfits for men, from casual wear to business suits.

Suspenders may be purchased for less than ten dollars from a variety of companies, making this an affordable option!

13. Tailor It

Finally, if you have a high-quality pair of pants but they don’t fit you anymore, you may want to consider having them professionally tailored. Waistband alterations typically cost between $14 and $20. It’s considerably easier to remove and reconnect a waistband with these tools than it is for the ordinary sewer!

In addition, a tailor will make your pants look like they were sewn together perfectly!

That said, you must decide for yourself whether or not this strategy is worth your time and money. You may not want to spend more than $20 on adjustments if your pants cost less than $20.

How to Make Jeans Stay Up Without a Belt

Without a belt, drooping pants can be kept in place with the shoelace method or by wearing suspenders. Safety pins and clips won’t work on jeans because of the thick fabric’s tendency to bunch up.

If your pants are a little too baggy, consider tucking in an undershirt or putting leggings underneath. When it’s cold outside, this is a terrific way to add extra insulation and bulk to your jeans so you can keep them snug around your waist.

The type of jeans you buy may also need to be reevaluated. Waists are shaped differently in different cuts of jeans. There are some styles that are more suited to particular body shapes than others. While thin jeans are normally tightened at the waist, low-rise jeans should wrap around your hips and can slip down more readily on persons with narrow hips if they are too loose.

Finally, denim’s cotton strands soften and become softer with wear. As a result, you should choose jeans that are a little bit too tight to begin with, as they will loosen up as you wear them.

How Do You Keep Your Pants Up?

To ensure that your trousers don’t fall down, buy pants in the right size and style for your body type. There are a variety of other options available if you don’t have the resources to go through with it.

Some tools for keeping your pants up can also be purchased. These are only a few examples:

  • You twist the waistband clasp inside the waist to remove superfluous cloth. This can be found on Amazon.
  • Side tabs can be inserted by paying a tailor. Each side of the waistband is tightened slightly by these little loops that link to buttons inside the waistband.
  • A hip-hugger or buckle-less belt is an option. Check out Amazon for this model!

How to Put a Belt on Pants Without Loops

How to Tighten a Belt

If your pants don’t have belt loops, you can put a belt over them, but it will look more decorative than functional unless you tighten it up.

Belt loops are standard on most men’s pants. Skirts, in particular, are notorious for this problem in women’s fashion. As a result, women choose to wear belts as a fashion statement rather than as a way to keep their pants or skirts in place.

In order to keep loopless pants in place, you can cinch a belt around your waist so tightly that it presses the fabric into your body. Nevertheless, it’s a risky move that you’ll likely regret!

Instead, if your pants require a belt, you may choose to sew belt loops onto them.

How to Tighten a Belt

To make a belt fit your waist more snugly, you can add more holes, move the buckle, or tie a decorative knot at the belt’s other end.

Additional holes for the belt tongue will allow you to buckle the belt in a smaller circumference around your waist, making the belt easier to wear. With customized leather punches or a connected drill, you may accomplish this task. A work table or outdoor surface should be placed under the drill belt to avoid drilling into your floor or furniture!

The belt can be made smaller by first removing the buckle, cutting away a section of it, and then reattaching it. This is a labor-intensive operation, but the end result might be a brand-new belt in a smaller size that looks brand-new!

You’ll need a little screwdriver for this. Remove the two small screws that hold most belt buckles to the belt with a screwdriver. You can then cut away a piece of leather or cloth depending on how much you want to get rid of.

In order to install the screws, you will require leather tools or a drill. Afterward, simply screw the buckle back on!

Finally, you can wear a belt wrapped twice around your waist for a unique design statement or knot the dangling ends together for a chic effect.


Wearing suspenders, making a pleat in the waistband with safety pins, or paying a tailor to adjust your pants to your exact body shape are all simple and practical ways to keep your pants up without a belt.

You can also use a shoelace to tie the back belt loops together or a clothespin to gather up the excess fabric around the waist if you need an emergency rescue.

In the past, have you had to deal with jeans that were too big? How did you manage to keep them in the air for so long? The best way to let us know is to leave a comment below.

Vote for this post!

Leave a Reply

Your email address will not be published.